Power Vector V250 Modular Input Amplifier

Description

The Bogen V250 Power Vector Amplifier 250W with 8 module bays for a wide array of inputs and outputs. Modules are available for signal processing and inputs such as: balanced and unbalanced inputs; stereo or mono; telephone systems/PBXs; transformer-isolated; microphones; tone generator; and bridging. The Power Vector automatically senses each module and inserts it into the signal path. A 5-position barrier strip allows for 4/8ohm or 25/70V output loads. When you need an amplifier with flexibility and reliability, the Power Vector V250 is the obvious choice.
8 module bays for inputs and outputs
Each input has a independant volume control
4 levels of priority between modules
125Hz Lo-cut filter for module 6
11-segment LED output level meter monitors the output level of the power amplifier with peak and average meter switch
Grounded, un-switched AC convenience receptacle with a 500W maximum capacity provided for external equipment
Remote volume control panel can operate motorized volume control (RVCP sold separately) Power Output 250W
Distortion <0.5%
Frequency Response Transformer: 45-20,000Hz
Direct output: 20-20,000Hz
Signal to Noise Ratio Fundamental: -94 dB
With Aux Module: -70 dB
With Mic Module: -60 dB
With Tel Module: -70 dB
Output Impedance Transformer-Coupled: 70V, 25V, 8 ohms (balanced or unbalanced)
Direct Coupled: 4 ohms
Muting 4 Steps: -60, -21, -10, 0dB
Output Connections Pre-EQ (RCA) x 1
Signal Processor (RCA) x 1
2 module bays
Input Connections 8 module bays
Specialties 500W unswitched grounded outlet
Dimensions 16.5 x 3.5 x 12″ (419.1 x 88.9 x 304.8mm)
Weight 40 lbs (18.14kg)
Packaging Info
Package Weight 45 lb
Box Dimensions (LxWxH) 18 x 8.5 x 2.5″