WP-571/US(W)

Description

The WP-571 is a PoC DGKat™ wall plate transmitter for HDMI signals. The WP-571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP-572.

• Max. Data Rate – 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• DGKat™ Signal Integration – Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• HDMI Support – HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD.
• 3D Pass-Through.
• System Range – Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables.
  Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
• EDID PassThru – Passes EDID signals between the source and display.
• Active Power Indication – The ON LED lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.
• Power Connect™ System – A single connection to the transmitter or the receiver powers the system when the devices are within 90m (295ft) of each other.
• Dimensions – 3.3cm x 3.6cm x 10.4cm (1.3″ x 1.42″ x 4.1″) W, D, H.

APPLICATIONS

• Board, conference, and training rooms.
• Presentation systems.
• Signal distribution and home theater.