Lowell Manufacturing Co.
Lowell Manufacturing Co.
Lowell ES-62T in-Ceiling Speaker System, 6.5" Coax
• Driver: 6.5 in. coaxial driver with high-frequency PEI tweeter and acoustic lens • Transformer: 32W • Enclosure: Zinc-plated steel back-can with reversible mounting dogs • *Must be bought in quantities of 2*
$193.12
Lowell Manufacturing Co.
Lowell LT2-810-72-BB 8 inch 15W Tile Speaker System with Protective Backbox
Quick Install Speaker for Suspended Tile Ceilings 8" Dual Cone Driver Fine Perforation Grille .147 cu.ft. Enclosure 2x2 Assembly
$177.44
Lowell Manufacturing Co.
Lowell RPAK-810-72 8" Ceiling Speaker, Blackbox, Tile Bridge Combo
• Driver (No. 810): 8 in. 15W dual cone with 10 oz. magnet, 54Hz–11.6kHz (±6dB) and 50Hz–20kHz (±6.6dB) frequency response, 97.9dB average sensitivity measured 1W/1M. • Dual-Voltage Transformer: 25V/70V transformer with primary taps at .25, .5, 1, 2 and 5W.
$169.47
Lowell Manufacturing Co.
Lowell ES-4T In-Ceiling Speaker
• Driver: 4 in. dual cone driver with high-frequency whizzer cone • Transformer: 16W. Tap selector switch behind grille for 25V, 70V, 100V or 8ohm bypass.
$127.41
Lowell Manufacturing Co.
Lowell LT-810-72-BB 1x2 Lay-in Tile Ceiling Speaker, 70/25V
Driver (810): 8 in. 15W dual cone driver with 10 oz. magnet, frequency response of 54Hz-11.6kHz (±6dB) and 50Hz-20kHz (±6.6dB) Average sensitivity of 97.9dB measured 1W/1M. Conical dispersion 95 degrees.
$127.23
Lowell Manufacturing Co.
Lowell R1810-72 Speaker/Grille Assembly
• Transformer (TLM-572): 25V/70V transformer. Taps at 0.25, 0.5, 1, 2 and 5W • Grille (WB-8): Screw-mount steel grille with 12.875 in. diameter. White. • Driver (810): 8 in. 15W dual cone driver with 10 oz. ceramic magnet.
$52.08
Lowell Manufacturing Co.
Lowell 25LVC MONO Attenuator
• Power Rating: 25W • Attenuation: 3dB per step (33dB total) • Use With: 25/70/100V speaker line • Activation: Rotary dial • Volume Positions: 0-10 • Termination: Phoenix-style • Wire Capacity: 14-gauge • Finish: Stainless Steel
$39.34
Lowell Manufacturing Co.
Lowell LBS8-R1 Tile Bridge for 8" Speaker
• 23.75 in. x 15.5 in.• 10.75 in. diameter opening• Mounting Aids: Wire-tie points for seismic anchoring where required by code, multiple attachment points• Driver Size: 8 inch• Grille Type: Screw-mount or torsion• Use with or without backbox
$16.88