Lowell ES-62T in-Ceiling Speaker System, 6.5" Coax

Overview:

Quick-install, 6.5 inch recessed ceiling speaker with full-frequency response for music and excellent intelligibility for speech—ideal for commercial and residential applications. Install in drywall, wood, tile or almost any ceiling (thickness up to 2.125 in.)

Performance:

Foreground or background music.

Assembly Includes:

• Driver:  6.5 in. coaxial driver with high-frequency PEI tweeter and acoustic lens

• Transformer:  32W

• Enclosure:  Zinc-plated steel back-can with reversible mounting dogs

• Grille:  Press-fit grille with scrim and pull-tool

• Mounting Aids:  Plastic paint shield to protect driver, C-ring and support rails

Compliance & Certification:

• Certified U.S. steel

• Made in the U.S.A. with global components

Compliance & Certification:

• UL 1480 fifth edition general signaling (USA)

• UL 2043 suitable for use in return air plenum space

A&E Specifications:

The loudspeaker system shall be Lowell model ES-62T, which shall include a high-performance 6-1/2 in. coaxial loudspeaker, ported bass reflex enclosure and press- fit grille for recessed ceiling installation. The frequency response shall be 64Hz-20kHz ±6dB. The sensitivity shall be 88.6 dB log average @ 1W/1M over the frequency response range, measured in half-space. The speaker shall be constructed of a polypropylene cone with rubber surround and a PEI tweeter. The woofer magnet weight shall be a minimum of 15.45 oz. (438.1g) and the woofer voice coil diameter shall be 1 in. (25.47mm). The transformer shall have primary taps for 100V (32, 16, 8 and 4.2 watt); 70V (32, 16, 8, 4 and 2 watt); and 25V (4.4, 2.2, 1.1, .55 and .28 watt) with a selector switch mounted on the front under the grille and will include a 4 ohm (UL minimum) transformer bypass position. The enclosure shall be 20-gauge zinc-plated drawn steel with internal volume of 379 cu.in. It shall have a seismic-restraint ring tie-point on the rear for use where required by code or ordinance. It shall feature four dog-mount ears that allow it to be mounted in a ceiling with a maximum thickness of 2.125 in. (54mm). A template shall be provided to assist in cutting mounting holes. A rear access cable or flexible conduit entrance strain relief shall be provided with a termination cavity that encloses a four-pin Phoenix-style connector. The connector shall include two terminals for input to the speaker and two parallel terminals for output to the next speaker in the string. The system shall include a C-ring for use in reinforcing the edge of drywall ceiling cutouts, or for use with the included support rails to guard against ceiling tile sag from speaker weight. Front baffle shall have a diameter of not more than 9.84 in. (249.9mm). Press-fit fine mesh grille shall be 20-gauge. CRS with UV rated powder coating (epoxy white), and shall include a thin piece of white scrim and a grille-pulling tool.