FSR PWB-250-BLK PWB 250 Wall Box w/ 6 IPS, 3 AC / Gang, 2 KO - Black

The PWB-250-BLK is a black cover and back box with 6 IPS and 3 AC Gang, 2KO. We have kept the cost low while delivering the quality and ease of installation you have always experienced with FSR products.

All models are ready to install and include a two part cover with mounting
screws in either black or white, back box, screws for wood or steel stud mounting,
grounding screws, tie wraps, and a rubber grommet.

The PWB is available in white or black and is suitable for painting or other finishing, matching any décor. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.

FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.

Applications:

• Anywhere a video display is wall mounted!
• Digital Signage
• Electronics Billboards
• Conference Centers
• Museums
• Schools
• General Meeting Facilities
• Airports
• Arenas

This unit is approximately 14.25” x 7”x4” and has three single gang knockouts and one IPS knockout to mount up to six single IPS plates. In addition, a removeable passthrough enclosure provides an additional single gang knockout and can be used to isolate cables that the installer may need to pass through the backbox. Specifically sized for installation in 2”x3” stud walls.

The back box is typically installed flush with the wall's surface, between either wood or steel studs. The appropriate mounting bracket and screws are included. A duplex box is also included for convenience and can be mounted at either the top or bottom duplex knockout areas on the back box.

There is a two part vented cover, available in black or white, that provides convection cooling for the internal components.

Features:

• Rugged 16 gauge steel back box
• Black or white 1/16" painted two part cover
• Simple installation
• Hardware included
• Connections and cables are hidden behind cover for a neat install
• Multiple knockouts in a variety of sizes