Altinex UT260-103 Under Table 3x1 HDMI/VGA/DP Switch HDBaseT Out
- Transmit Audio/Video/Control up to 70m over one Cat 6/Cat 6A/Cat 7 cable
- Support VGA with WUXGA resolution, HDMI 4k x 2K, DP 1.2 with 4K@30Hz
- Auto/manual switching
- Internal/external audio selection
- HDCP 1.4 compliant
- Remote power for HDBT receiver
The Altinex UT260-103 Switch is a high performance three-input, one-output HDMI/VGA/DisplayPort switch with HDBT output and works with the UT260-104 receiver. The switch/transmitter supports HDCP repeater functions along with fast switching among input ports providing a great way to convert popular video formats (HDMI, VGA, DisplayPort) to HDBT and transmit them over an existing network or over a single cable. In addition to video, the UT260-103 also allows both IR and RS232 control signals to from the transmitter to the receiver, or from the receiver to the transmitter. The RS232 ports are independently configurable allowing different baud rate at the transmitter and receiver ends depending on the requirements of the control equipment.
The TX+RX system supports manual or auto-switching modes, pass-through IR or RS232 controls, and custom audio selection. Auto-switching automatically switches to the newest input. Manual control allows the switch to be controlled from user interface momentary switches, RS232 protocols, or via the built-in web server. A special feature gives the user the ability to select between using the embedded audio (HDMI/DP) or the external audio from the 3.5mm audio input port. The external audio is automatically selected with the VGA input, but can also be used to override the HDMI or DP embedded audio.
A power supply is included with the UT260-103 and is cable of providing remote power to the UT260-104 receiver when used with a direct connection between the transmitter and receiver.
