ADVANCED INTELLIGENT DSP RF RECEIVER (72 MHZ)
Listen Technologies’ LR-5200-072 RF receiver offers assistive listening users an option for high-performance audio in a compact device that offers best-in-class pickup and reduced noise.
The LR-5200-072 also provides houses of worship, theaters, lecture halls, and other venues with an affordable and easy-to-manage solution when adding or expanding their assistive listening options.
The built-in rechargeable battery technology makes the LR-5200-072 an economical and environmentally friendly choice, reducing the costs of operation and ownership while offering extended use. Each unit features a micro-USB connection which, in addition to being used for quick and convenient battery charging, also allows for fast and simple firmware updates, setup, and programming using the free iDSP software.
The integrated neck loop and lanyard with DSP loop driver makes the LR-5200-072 easy to wear and convenient for listeners with T-coil equipped hearing aids. Additionally, the OLED display built in to each receiver provides at-a-glance information including channel status, battery level, and more.
From classrooms to conferences, businesses to banquet halls, and more, the LR-5200-072 makes an outstanding choice for a comfortable, clear, and reliable personal listening receiver.
Includes
One (1) LR-5200-072 Advanced Intelligent DSP RF Receiver (72 MHz)*
*The LR-5200-072 comes with a quick start guide and a non-proprietary field replaceable Lithium-ion battery.
Specification
Audio
Frequency Response | 50 Hz - 15 kHz (±3 dB) |
System Distortion | < 2% total harmonic distortion (THD) at 80% deviation |
Output/s | Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm |
System Signal to Noise Ratio | SQ enabled 80 dB, SQ disabled 60 dB |
Controls
User Controls | Power, up/down volume, Listen button for end user channel selection |
Programming | Via software and USB port |
Set-up Controls | Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel |
Indicators
LEDs | Flashes when batteries are low or to indicate charging, solid when fully charged |
Display | Channel designation,battery level, unit number, charging status |
RF
Frequency Range | 72.025 - 75.950 MHz |
Number of Channels | 17 wide band, 40 narrow band |
Sensitivity | .6uV typical, 1 uV maximum for 12 dB sinad |
Frequency Accuracy | ± .005% stability 32 to 122 ºF (0 to 50 ºC) |
Squelch | Programmable in 20 steps, automatic on loss of RF signal |
Antenna Type | Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable |
Power
Power Supply | Micro USB connector, 5 V, 500 mA |
Battery Type | Lithium Ion 3.7 Vdc, 1200 mAh |
Battery Life | 8 Hours of continuous use |
Battery Charging Time | Fully charged in 2.5 Hours |
Physical
Color | Black |
Unit Weight with Batteries | 2.40 oz. (68 g) |
Shipping Weight | 3.20 oz. (91 g) with 1.0 lbs. (454 g) minimum |
Dimensions (H x W x D) | 3.75 x 2.00 x 0.64 in. (9.6 x 5 x 1.7 cm) |
Unit Weight | 1.60 oz. (45 g) |
Dimensions with Belt Clip | 3.75 x 2.00 x 0.80 in. (9.6 x 5.0 x 2.1 cm) |
Environmental
Temperature - Operation | 14 to 104 ºF (-10 to 40 ºC) |
Temperature - Storage | (-)4 to 122 °F (-20 to 50 °C) |
Relative Humidity | 0 to 95% relative humidity, non-condensing |
Compliance
Standards | FCC Part 15, Part 90, Industry Canada, RoHS |