STATIONARY 3-CHANNEL RF TRANSMITTER (72 MHZ)
Our Part Number: LT-803-072-01
For businesses or venues requiring anywhere from one to three channels of assistive listening audio, the LT-803-072 Stationary 3-Channel RF Transmitter is an excellent choice.
New product
More info
Universal inputs allow for the use of nearly any audio source including mixers, micrphones, MP3 players, and more, and our signature Look & Listen (TM) LCD display provides immediate information about channel, lock, and RF power. The LT-803-072 also includes a power supply making it easy to set up and start using right away.
Includes
One (1) LT-803-072 Stationary 3-Channel RF Transmitter (72 MHz)
One (1) Power supply
One (1) Quick Reference Card
Specifications
Audio
| Frequency Response | 50 Hz - 15 kHz (±3 dB) |
| Signal-to-Noise Ratio | 62 dB (A-Weighted) |
| Audio Input 1 | Rear panel, one (1) Female XLR and 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDC |
| Audio Input 2 | Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohm |
| Audio Processing | Compression can be turned on/off. Slope internally adjustable from 1:1 to 4:1. Default 2:1 |
| Contour | Cuts and boosts frequencies above 5 kHz |
| Distortion | < 2% total harmonic distortion (THD) at 80% deviation |
| Audio Output | Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohm |
| Headphone Output | Front panel, one (1) 3.5 mm (0.14 in.) stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohm |
Controls
| User Controls | Front Panel: Power, Test Tone on/off, Channel up/down, Input Levels, Mix Level, Contour, Monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high) |
| Internal Adjustments | Compression ratio for audio processor |
| Programming | Process on/off, channel lock |
Indicators
| LCD | Channel Designation, lock status, RF power level (front panel) |
| Audio Input Status LEDs | Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red) |
| Processing | Indicated by a green LED when on (front panel) |
| Test Tone | Red LED illuminates when test tone is enabled |
| RF Power | Indicated on the LCD (low, mid, high) |
RF
| Frequency Range | (A) 72.100, (E) 72.900, (H) 75.900 |
| Number of Channels | 3 wide band |
| Frequency Accuracy | ± .005% stability 0 to 50ºC (32 to 122º) |
| Antenna Type | Various antennas available |
| Transmitter Stability | 50 PPM |
| Transmission Range | Up to 305 m (1,000 ft.) |
| Antenna Connector | BNC, 50 Ohms (Use RG-58 < 100 ft or RG-8 > 100ft) |
| Output Power | 80,000 uV at 3 m |
Power
| Power Supply | In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards) |
| Power Supply Input | 100-240 VAC, 50-60 Hz, 0.4 A |
| Power Supply Output | 12 VDC, 1.3 A, 15.6 W |
| Power Supply Connector | 5.0 mm (0.02 in.) OD, 2.5 mm (0.01 in.) ID, barrel type |
| Compliance | UL, CE, GS, TÜV, RoHS |
Physical
| Width | 21.5 cm (8.50 in.) |
| Height | 4.5 cm (1.75 in.) |
| Depth | 23 cm (9.13 in.) |
| Color | Dark Grey with white silk screening |
| Unit Weight with Power Supply | 2.0 kg (4.5 lbs.) |
| Shipping Weight | 2.7 kg (6.0 lbs.) |
| Rack Mounting | One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space,optional rack mount (LA-326) |
| Weight | 1.2 kg (2.6 lbs.) |
Environmental
| Temperature - Operation | -10 ºC (14 ºF) to +40 ºC (104 ºF) |
| Temperature - Storage | -20 ºC (-4 ºF) to +50 ºC (122 ºF) |
| Relative Humidity | 0 to 95% relative humidity, non condensing |
Compliance
| RF | FCC Part 15, Part 90, Industry Canada |
