AMPLIFIER 150 WATTS DUALEQ

Bogen's Gold Seal Series 150W Public Address Amplifier is a 6-channel Class-D rack-mountable PA with a dual-function 10-band EQ, a variable loudness contour, an Audio Enhancement circuit, and telephone paging capabilities. The GS150D accommodates up to six balanced mics, two auxiliary inputs, and a telephone input. It has 4 and 8 Ohm speaker outputs for 25V, 25VCT, and 70V distributed systems, a booster amp and power amp output, and a recording device feed.

For the microphone inputs the PA has four XLR connections, one screw terminal, and an RCA jack, each with switchable phantom power and low frequency roll off. The GS150D has dedicated volume controls for all inputs, with a global audio enhancement switch with mix control. Also, the aux 1 / mic 6 and aux 2 channels have a contour switch for EQing loudness. The mic 5 / tel and mic 6 / aux 1 inputs are switch-selectable, and the mic/aux/tel precedence function enables external mute control for individual inputs. It also has a line-matching transformer output (available separately), and a telephone paging input feature with automatic level control and voice activation for muting the aux inputs.
Its dual-function 10-band EQ can be used for either feedback control or acoustic shaping. With the GS150D, you can insert signal processing units, activate the EQ contour switch for aux 1 & 2, and/or engage the global audio enhancement switch to finesse your overall sound. You can change the master level via a remote volume control (GSRVC; available separately), which is functional for up to 1000'.
The Gold Seal Series 150 is suitable for sound-reinforcement tasks at conferences, panel discussions, presentations, seminars, clubs, and outdoor events.
Six microphone inputs
Telephone input with automatic level control
Auxiliary output for recording
10-band graphic EQ for feedback control or acoustic shaping
Loudness contour function
Global audio enhancement switch
Phantom power for all mic inputs
Aux input muting
Remote master volume control capability
Insert optional signal-processing units
Booster amp output
Low-frequency roll-off for mic channels
Optional rack-mounting kit: GSDRPK
Optional security cover: GSTRC

Power Rating 150 W (RMS)
Transformer Output Frequency Response: 65 Hz to 20 kHz, +0/-2 dB
Distortion: 0.5% (max), 65 Hz to 20 kHz
SNR Fundamental: -70 dB
Aux 1 and 2: -70 dB
Tel: -70 dB @ 600 Ohms
Mics 1-6: -60 dB @ 200 Ohms
Inputs Microphone
4x XLR (low-Z balanced)
2x pluggable screw terminals (low-Z balanced)
Sensitivity: 0.35 mV (200 Ohms)
Aux 2x Hi-Z RCA
Sensitivity: 0.085 V (10 kOhms)
Telephone: Pluggable screw terminals, sensitivity: 0.07 V (600 Ohms)
Pluggable Terminal Strip: Precedence (mics 1-3, mic 5 / tel, mic 6 / aux 1, aux 2, com)
Outputs WMT1A: RCA, 25 V @ rated output
Power Amp: RCA, 5 V @ rated output
Tape Out: RCA, 700 mV @ rated output
Pluggable Terminal Strip: Gnd, com, loads, 25 V, 70 V
Preamp: RCA
Output Impedance Balanced or unbalanced 4 Ohm or 8 Ohm
Output Regulation > 2 dB from no load to full load
AC Input Voltage 120 V ~ 60 Hz
AC Current (l) 2.50 A
Variable Mute Range -60, -21, -10, 0 dB (aux 1 & 2)
Automatic Level Function Distortion: <0.5%
Compression: 25 dB (Tel)
VOX Threshold Input 20 mV (VOX control max cw position)
Mic Precedence -60 dB: mic 1, 2, 3, mic 5 / tel, mic 6 / aux, aux 2
Phantom Power 13 VDC
Low Cut Filters 3 dB @ 100 Hz
Loudness Switch +8 dB @ 100 Hz, +4 dB @ 10 kHz (Aux 1 & 2 control at 1/4 cw position)
Overload Protection Electronic with automatic reset
Thermal Protection Thermistor attached to heat sink
Dimensions (W × H × D) 16.5 x 3.5 x 13.5" / 41.9 x 8.9 x 34.3 cm
Packaging Info
Package Weight 33 lb
Box Dimensions (LxWxH) 19.0 x 15.0 x 5.0"