RoboSHOT In-Wall Enclosure 999-2225-118

Overview:

The Vaddio IN-Wall camera mounting systems are an attractive way to mount PTZ cameras on a wall where room aesthetics are critical. These mounting systems use the depth of the wall cavity to minimize the camera’s extension into the room while providing a finished look to the installation.

Cameras from Vaddio, Sony BRC series, Sony EVI series, Cisco (Precision HD, PrecisionHD 1080p, Precision60), Polycom (EagleEye, EagleEye 1080 HD an EagleEye IV) and LifeSize (4X and 10X) were selected and the camera enclosures were carefully designed and sized to fit the Vaddio EZCamera™ Interface Module (EZIM™) in the back of the box to enable use of the Vaddio Quick-Connect™ CCU and PRO Cat-5 cabling systems for applicable cameras (see below). For the EVI-D70/80/90 the Vaddio EZCamera Shoe is attached to the back of the camera. The in-wall mounting box can be installed during room build-out, and the camera platform and face frame can be added at a later time. All of the parts are powder coated in a white finish, but can be painted to match any décor.

Features:

Deep Back Box Enclosure: The 3-15/16” deep metal wall box uses the maximum depth of a standard 2” x 4” framed wall cavity and minimizes the camera’s protrusion into the room.

Cable Management: Each Enclosure is outfitted with three (3) conduit knockouts (2-sides, 1-top) for flexibility and easy access to cabling. The bottom of each wall box and platform has an additional cable slot for running standard cables to the cameras.