ControlSpace CC-64 Control Center (White)

Custom programming allows the CC-64 to operate systems of varying complexity by switching audio sources, selecting scenes and changing complex system confi gurations. The bright LCD panel makes it easy to read or change the system settings. Using the CC-64 control center simplifi es even complicated system changes. Product Information The CC-64 provides four rotary encoders with circular LED arrays for a user friendly method of managing gain settings or scene selections. A fifth encoder provides control over programmed parameter sets or scenes. Each gain control knob can be programmed to control a single gain block or group of gain blocks. The group of gain device scan span elements of multiple ControlSpace ESP- 88 processors. The combination of the rotary encoders and LED display allow real time tracking of changes made elsewhere in the system. A large, 2-line by 40-character backlit LCD provides the user with the names of the system elements being controlled. Using custom programming, the CC-64 can manage a variety of system elements, including audio sources, scene selection settings, and specifi c system confi gurations. The CC-64 also supports a “custom mode”– intended for installers, not end users – in which any parameter in the system can be viewed and changed using the LCD display and control knobs. The CC-64 is programmed – linking or mapping signal processing objects to its controls – using the ControlSpace Designer software. The software includes many features to simplify programming including Smart Simulation. This feature includes a virtual CC-64 display where all programming can immediately be verifi ed on-screen — without going ”online” or connecting to hardware. Key Features > 2-line by 40-character backlit LCD > Four encoders for changing the gain or selecting scenes/sources > Each encoder includes a 15-segment LED array for indicating the current level or state > Each encoder features push buttons for muting gain controls or making selections > Sixteen gain/selector controls (four banks of four) > Ten character descriptions of the gain control or scene appear on the LCD above the encoder > Lock function in software prevents local changes > 10Base-T Ethernet network communication > Up to 16 CC-64 control centers can be connected per system > Power over Ethernet cable or separate cable > LEDs for status, link and network transmit/receive > Fits standard 5-gang wall box > UL6500 listed and CE approved > Bezel is removable for podium or rack panel mount