LISTEN IDSP ADVANCED LEVEL II STATIONARY RF SYSTEM (216 MHZ)

Perfect for spaces with a capacity of up to 100 people, the LR-5200-216 receiver offers listeners exceptional audio performance thanks to having 20 dB less hiss than other RF receivers on the market. Each unit gives listeners the choice of multiple channels, ideal for venues where language interpretation or alternate/separate audio streams are needed. The rechargeable Lithium-ion battery in each receiver offers long life and significant cost savings over the life of each unit, and they fully recharge within 2.5 hours.

The included universal antenna and universal rack mounting kit make the LS-57 an adaptable, flexible solution by allowing you to incorporate it into nearly any permanent audio setup. The system also includes universal ear speakers, neck loops/lanyards, a 4-port USB charger, and the assistive listening notification signage kit needed to meet the needs of your customers and ensure your venue’s compliance at the same time.

Includes

• One (1) LT-800-216-01 Stationary RF Transmitter (216 MHz)
• One (1) LA-122 Universal Antenna Kit (72 MHz and 216 MHz)
• One (1) LA-326 Universal Rack Mounting Kit
• Four (4) LR-5200-216 Advanced Intelligent DSP RF Receiver (216 MHz)
• Four (4) LA-401 Universal Ear Speaker
• Two (2) LA-430 Intelligent Earphone/Neck Loop Lanyard
• One (1) LA-423 4-Port USB Charger
• One (1) LPT-A107-B Dual RCA to Dual RCA Cable 2 m (6.6 ft.)
• One (1) LA-304 Assistive Listening Notification Signage Kit

Architectural Specs

Furnish and install an RF wireless assistive listening system for use by the hearing-impaired. The assistive listening system (ALS) shall be capable of broadcasting on 57 channels and be frequency agile. The RF receiver shall be capable of receiving on 57 wide and narrow band channels.  The device shall have a programmable multi-function Listen button that can be tuned for the venues desired channels and electronically lock out any unused channels.  The receiver shall have a signal-to-noise ratio of 70 dB or greater and shall have an audio frequency response of 50 Hz – 15 kHz (±3 dB). The device shall employ a unique DSP SQTM noise reduction technology. The unit shall have a programmable squelch circuit.  The unit shall incorporate a multi-functional display that indicates battery status, inventory number and channel. The device shall have the option of being lanyard or belt clip worn. The lanyard shall have the option of an integrated DSP driven neck loop that automatically senses and sends optimized audio signals directly to hearing aids and cochlear implants equipped with telecoils. The neck loop shall have a field strength of 400 mA/m (+/- 3dB) and frequency response of 100Hz to 5kHz (+/- 3 dB ref 1kHz).The device shall have a USB connector used for inventory control, set up, charging and firmware upgrades. The device shall incorporate automatic battery charging circuitry and use a non-proprietary Lithium-ion battery. The device shall have additional charging contacts to allow multiply charging options. The ALS system shall have 70 dB SNR or greater, end-to-end. Listen Technologies Corporation products are specified.