Catalog
Speakers
Subcategories
Bose Pro
RoomMatch Pull-Back Bracket
Use with bottom-most array module to provide third-point suspension to building structure to allow more extreme downward angle of arrays than possible from 2-point, gravity-hang suspension.
Call for priceBose Pro
RoomMatch Gain Shading Kit
Optional accessory that installs in the input panel of RoomMatch full-range modules to allow attenuation of the bottom-3 compression drivers as compared to the top 3 drivers.
Call for priceBose Pro
RoomMatch Ground Stack Pitch Brackets
Attaches to subwoofer module and mounts one or two RoomMatch full-range modules, allowing pitch angle adjustment from 0 to 30 degrees down pitch (differs by module vertical coverage pattern).
Call for price- Call for price
Bose Pro
RoomMatch Ground Stack Base Kit
Use with up to three (3) RoomMatch modules for ground stack arrays. Requires subwoofer module in bottom position.
Call for priceBose Pro
RoomMatch Quick Release Pins Kit
Set of 4 quick-release pins designed to replace the graded M10 fasteners for module-to-module connections.
Call for priceBose Pro
RoomMatch Fly Kit for RMS218
An accessory side-plate rigging kit for the RoomMatchยฎ RMS215/RMS218 subwoofer module to allow integration of subwoofer modules in RoomMatch arrays.
Call for priceBose Pro
RoomMatch Asymmetrical 5° vertical modules
Bose RoomMatch DeltaQ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship, in which the large-format waveguides with 42 coverage patterns are required.
Call for priceBose Pro
RoomMatch large-array frame
Use with 4 to 8 full-range or subwoofer array modules in overhead suspended arrays.
Call for priceBose Pro
RoomMatch Long Extender Bar
Use with large-array frame to accommodate subwoofer module mounting behind primary array.
Call for priceBose Pro
RoomMatch Short Extender Bar
Use with large-array frame to accommodate subwoofer module mounting behind primary array.
Call for priceBose Pro
RoomMatch RMS218 VLF-Subwoofer
The RoomMatch RMS218 VLF-subwoofer is designed primarily to extend the low-frequency response of Bose RoomMatch arrays down to 25 Hz.
Call for price